Charging your eFoil battery
Which charger you need, the right cable, charge times, and best practices.
Match your charger to your battery generation — they are not interchangeable.
Which charger do I need?
Battery | Charger |
|---|---|
Gen5 Full Range or Light (LIFT5) | Quick Charger Gen5/LIFTX |
LIFTX Battery | Quick Charger Gen5/LIFTX |
Gen4 Full Range or Light (LIFT4 / LIFT3 F) | eFoil Battery Charger (Delta Q IC1200) |
The Quick Charger Gen5/LIFTX covers both Gen5 and LIFTX batteries — if you own a LIFT5 and a LIFTX, you only need one charger. The Delta Q IC1200 does NOT charge Gen5 or LIFTX, and the Quick Charger does NOT charge Gen4.
Charger cables
Fischer (5-pin) — standard cable included with the Delta Q charger for Gen4 batteries.
ODU (8-pin) — for older batteries; sold separately. If your battery has an ODU port, you need the ODU charger cable.
How to charge
Connect the charger to a wall outlet using the region-specific power cable.
Connect the charger cable to the battery.
The charger indicator light shows charging status.
Wait for the charger to indicate a full charge.
Disconnect the charger cable from the battery first, then unplug from the wall.
Charge times
Battery | Time |
|---|---|
Gen4 Full Range | Under 2 hours (Delta Q IC1200) |
Gen4 Light | ~30 minutes |
Gen5 / LIFTX | Contact Lift for specifics with the Quick Charger |
Tips
Charge in a well-ventilated area, never on a flammable surface.
Make sure the battery is dry before connecting the charger cable.
For the longest lifespan, store at 40–60% when not in use and charge to full right before you ride — avoid sitting at 100% or regularly dropping below 20%.