Help Center
Search
Help Center
Search
Search the help center, or browse every article from the Help Center.
Search
Troubleshooting
Collision damage / impact repair
How Lift's sacrificial design protects the expensive parts — and what to replace after a hit.
Troubleshooting
Phase seal maintenance
What phase seals do, why they matter, and when to replace the tri-color set.
Troubleshooting
Water ingress in the hatch compartment
Why water in the hatch is serious, how to prevent it, and what to do if it gets in.
Troubleshooting
Data cable / connector issues (Fischer & ODU)
Wrong cable, corroded pins, or loose connections between battery, eBox, and charger.
Troubleshooting
LCS connection issues
Propulsion that won't click in, props that won't snap on, and intermittent cutouts.
Troubleshooting
Firmware updates
How to update your battery, eBox, and controller through the Lift app.
Troubleshooting
Hand controller problems
Won't turn on, won't connect, or throttle doesn't work — including the Classic reset.
Troubleshooting
Bluetooth signal loss / controller disconnects mid-ride
Antenna, moisture, and controller-battery causes of mid-ride dropouts (common on LIFT3).
Troubleshooting
eBox (motor controller) failure
What the eBox does, why it fails, how to confirm it, and which eBox fits your board.
Troubleshooting
Propulsion not responding / motor won't spin
Board powers on and the controller connects, but the trigger does nothing — here's why.
Troubleshooting
Battery showing irregular lights
What battery LED colors and patterns mean — and when a fault means stop riding.
Troubleshooting
Dead battery / battery won't power on
Recovering a deeply discharged battery and preventing over-discharge in storage.
Troubleshooting
My battery won't charge
The most common cause is the wrong charger — plus cable, pin, and BMS checks.
Troubleshooting
My eFoil won't start / won't power on
Step-by-step diagnosis when the board shows no response to the power button.
Boards & Accessories
Non-eFoil foil boards (prone, wing, wake & downwind)
Lift's unpowered foil board lines — prone surf, wing/kite, wake/tow, and downwind SUP.
Boards & Accessories
eFoil stand, hardware kits & service parts
The eFoil stand plus the replacement hardware, seals, and service parts that wear over time.
Boards & Accessories
Bags, covers & battery cases
Board bags, wing bags, propulsion cases, and the battery transport tiers (including air travel).
Boards & Accessories
Blowfish inflatable stability accessory
Inflatable rails that make learning easier and turn your eFoil into a multi-use platform.
Controllers & Electronics
eBox (motor controller)
What the eBox does, which one fits your board, and the data cables it uses.
Controllers & Electronics
Hand controllers (Elite, Lift & Classic)
The three controllers, their features, compatibility, and replacement parts.
Propulsion & Masts
Masts for classic (non-eFoil) foiling
Classic, X2, M2, and M6 carbon masts for paddle, surf, wing, kite, and tow foiling.
Propulsion & Masts
Propellers & the LCS Jet
Folding, fixed, and jet options for LCS and legacy bolt-on eFoils — and when to choose each.
Propulsion & Masts
Propulsion units (LCS & Classic)
The 55mm and 68mm LCS motors, high-mount options, and legacy bolt-on propulsion.
Batteries & Charging
Chargers & charging cables
The two charger generations, what each charges, and which cable you need.
Batteries & Charging
LIFTX battery
The lighter battery for the LIFTX — and how to run it on a LIFT5 with the adapter.
Batteries & Charging
Lift batteries: Gen4, Gen5 & LIFTX
How the three battery platforms differ, their specs, and what fits your eFoil.
Wings
Back wings: families, sizes & how to choose
Surf V2, Glide, Flow, Carve, Carve EXT, Florence X, and Grubb 16 stabilizers explained.
Wings
Front wings: families, sizes & how to choose
Surf V2, Camber Pro, Havoc, High Aspect, HA-X, Vario, Florence X, Grubb — and which to pick.
eFoils
LIFT3 & LIFT3 F (legacy)
Specs, compatibility, signal-loss troubleshooting, and parts for the LIFT3 generation.
eFoils
LIFT4 (legacy)
Specs, compatibility, common issues, and upgrade paths for the LIFT4 generation.
eFoils
LIFTX (powered surf foil)
A lighter, surf-shaped eFoil with a folding prop for powered surf, downwind, and wake.
eFoils
LIFT5 F (entry-level)
The most accessible way into eFoiling — same ecosystem, fiberglass board, upgrade path.
eFoils
LIFT5 (Sport, Cruiser, Pro & Laird)
The current carbon LIFT5 family — board sizes, the Gen5 battery, and how to choose.
About Lift
About Lift Foils
Who Lift is, where the eFoils are made, and the people behind them.
Guides & How-To
eFoil maintenance guide
After-ride rinsing, seasonal inspection, and the wear items that need periodic replacement.
Guides & How-To
Wing selection guide
How to choose front and back wings by riding style, rider weight, and skill level.
About Lift
How to contact Lift support
The fastest way to reach the team, what to have ready, and what to expect.
Guides & How-To
The Lift Connect System (LCS) explained
Lift's tool-less quick-disconnect system for swapping propulsion, props, and wings in seconds.
Policies & Warranty
Privacy & terms of service
A plain-language summary of how Lift handles data and the store's terms of service.
Guides & How-To
Hand controller guide
The three Lift controllers, which one fits your eFoil, and how to use it.
Guides & How-To
eFoil compatibility quick reference
Battery, charger, controller, propulsion, and wing compatibility across every Lift generation.
Policies & Warranty
Returns & refunds
How Lift handles transit damage, defects, and buyer's remorse.
Guides & How-To
Charging your eFoil battery
Which charger you need, the right cable, charge times, and best practices.
Guides & How-To
Battery safety & storage guide
Daily-use safety, long-term storage charge levels, and how to transport your battery.
Getting Started
Rider age & safety basics
Age guidance, protective gear, auto-shutoff behavior, and where to find safety videos.
Policies & Warranty
Shipping policy
Carriers and timelines for domestic and international orders, including battery shipments.
Getting Started
Your first ride: a beginner's guide
Prone to kneeling to standing — the proven progression for getting up and flying.
Getting Started
Unboxing & assembly (LIFT5 / LIFTX)
Go from box to water in under 60 seconds with the tool-less Lift Connect System.
Policies & Warranty
Extended warranty & product protection (SureBright)
Optional Breakdown and Accidental Damage plans that extend beyond the 1-year warranty.
Policies & Warranty
Warranty policy
What the 1-year limited warranty covers, what it doesn't, and how to make a claim.
Getting Started
What is an eFoil?
How an electric hydrofoil flies above the water — and what makes it different from a surfboard.
Manuals & Installation
LCS Propeller installation & configuration
The Lift Connect System (LCS) lets you easily configure your propulsion setup, no tools required, with a range of options for different riding experiences,…
Manuals & Installation
Lift Foil Stand installation guide
Before using the foil stand, read and follow all safety guidelines:
Manuals & Installation
LIFTX Battery Adapter user manual
1. Align the LIFTX Battery Adapter with the battery pocket inside the LIFT5 board.
Manuals & Installation
Lift Charger manual
The Lift Charger is designed exclusively for:
Manuals & Installation
Lift Hand Controller manual
The LHC has a built-in vibration motor that provides vibration alerts. These vibrations are designed to notify the user when certain functions are occurring, or…
Manuals & Installation
Elite Hand Controller manual
To charge your Elite Hand Controller (EHC), use the included USB-C cable. Attach the magnetic USB-C charging cable to the charge port found on the underside of…
Manuals & Installation
Lift Jet installation guide
The Lift Jet is quick and easy to assemble:⚠️ Before you begin, it is critical all eFoil equipment is turned off and the battery is disconnected before working…
Manuals & Installation
LCS Jet installation guide
The Lift Connect System (LCS) Jet is quick and easy to assemble:Before you begin, it is critical to ensure all eFoil equipment is turned off and the battery is…
Manuals & Installation
LCS Folding Propeller 2.0 installation guide
The Lift Connect System is quick and easy to assemble. Check to make sure you have all components ready for your installation:
Manuals & Installation
Blowfish installation guide
Before you begin, check to make sure you have the correct Blowfish kit for the size of your eFoil. The eFoil size is displayed on a tag near the top handle of…
Manuals & Installation
LCS Fixed Propeller installation guide
The Lift Connect System is quick and easy to assemble. Check to make sure you have all components ready for your installation:
Manuals & Installation
LIFT5 / LIFTX owner's manual
⚠️IMPORTANT: The Lift Foils App is required to update the firmware on your components. Ensure that you have the app installed and you are connected to the…